Back to main Back to Advanced level Back to Rivers and floods

Factors affecting river discharge: the storm hydrograph.

A storm hydrograph is a way of displaying how the discharge of a river can change over time in response to a rainfall event.  The discharge of a river is just the amount of water passing a certain point every second, and is calculated by multiplying the cross sectional area of the river by its velocity.  Because the cross section is measured in metres2  and the velocity is measured in metres per second the discharge is measured in metres 3 per second.  These units are known as CUMECs (CUbic Metres per sECond). 

 

The graph shows base flow which are the contributions made to the river via soil and ground water flows.  These will be ever present on the graph unless there is a long extended period without any rainfall.  The runoff or storm flow is the water that arrives in the river via surface runoff or rapid throughflow through the rock.  The rising limb gives an indication of how fast water is reaching the channel and represents the level of water rising in the channel.  The steeper the rising limb the more likely a flood is to occur, this is vital knowledge for flood forecasters.  The falling limb shows the river as its level falls.  Peak discharge is the maximum amount of water in a river after a rainfall event, if this level surpasses the bankfull discharge then a flood will occur where the river overtops its banks.  The last item indicated on the hydrograph is the lag time, this is the amount of time between the peak amount of rainfall and the peak discharge in the river.  Generally, the less the lag time the quicker the river rises, the more FLASHY the graph and the more likely a flood.
Find out more

1. The lag time and steepness of approach segment is determined by many factors.  Copy
the table below into word and try to complete it thinking about extreme cases for each situation.

2. Use this excel file to draw your own hydrograph on Excel

3. Attempt the whiteboard activities from the National Grid for Learning in Wales.

 

Table for task 1

Factor Steep rising limb and small lag time Gentle rising limb and long lag time
Soil and rock  type - permeability    
Vegetation coverage    
Drainage basin shape - round or elongated?    
Relief of the land    
Level of urbanisation    
Land use    
Stream density in the basin