Back to main Back to Advanced level Back to Rivers and floods

Valley profiles – long profile and changing cross profile downstream, graded profile, potential and kinetic energy.

 

The long profile of a river is a way of displaying the channel slope of a river along its entire course.  Generally, in the upper part of the long profile or Thalweg there is more turbulence, lots of bed load in comparison to discharge and lots of roughness and fiction.  As more streams and tributaries join the river, roughness decreases, discharge and velocity increases and the erosive power of bed load will decrease.  As a result the gradient of the river will generally decrease creating a concave long profile with distance down stream, and deposition serves to enhance this phenomenon further.

Erosion in the upper valley is generally straight down into the bed, and vertical, helping to keep gradient steep.  In the lower reaches erosion is lateral or side to side, reducing gradient and further enhancing the concave long profile.

The long profile of a river - click to go to the source

Base level is the lowest level to which erosion by running water can take place.  This is generally accepted as sea level, but local base levels can arise when rivers enter an inland sea or lake, where a tributary enters a bigger river or where a resistant band of rock crosses a valley.

Conceptual base level

Local changes to base level

Find out more
Get the plan here

Try the task below.

Grade is the concept of a river being in equilibrium, with a balance between the rate of erosion and deposition.  This balance is constantly upset by changes in discharge and sediment load, and can alter over long periods of tie because of changes in Base Level.  Also, rivers can change across their channels, where variable discharges and loads cause channels to shift position and shape to adjust to these changing characteristics.  Base level can change in many ways, and this is covered on the Rejuvenation page.

Tasks

This exercise is to get you to explore how the long profile of a river can change.  I have plotted sites each 1km apart in the upper reaches and further apart in the lower reaches (as best as I could manage on the computer!) along the course of a river in Northern Northumberland, the River Breamish.  This river flows from its source in the Cheviots East, North and then East again toward the sea at Berwick. 


View Long Profile Breamish in a larger map 

1. To complete this exercise you need to find the heights of the land at each site, and add that height to this excel chart. To do this you will need to ensure that Google maps is on Terrain view. The detail for heights isn't fantastic on Google maps, so you may want to use the Ordnance Survey get a map tool to find those heights.

2. Then you need to draw a scatter graph with a line joining the points using that data in Excel. This will show you the long profile of the River Breamish in Northumberland

3. Once you have your graph I would like you to copy and paste the graph into a Word file, and fully annotate that long profile with photographs and images from Google Earth - you can take a virtual tour of the rivers path here, and you could print screen images of this.  You should also add what landforms you can see to the correct spot.

You should consider getting images of

The source of the River Breamish

The middle courses around the River Till

The mouth where the River Tweed enters the sea

4. To finish, look at David Waugh pages 73 to 74, add labels to your long profile from the book and respond to the hypothesis at the bottom of page 74.

5. Explore the River Dane

You will also draw some Cross sections across the River Breamish