Back to main Back to A-Level Back to Weather

Climate on a local scale: urban climates

Get the plan

Air quality: particulate pollution, photochemical smog and pollution reduction policies.

 

 

The quality of air within urban areas is often of a much poorer quality than that of surrounding Rural areas.  This is particularly pronounced in industrial cities and in cities within LEDCs and LDCs where environmental standards applied to heavy industries and vehicles are much lower than in richer nations.  The major difference between urban and rural areas is the use of fossil fuels, which produces lots of waste gas and particulate matter such as;

  • Particulate matter – this is fine grade material that can cause damage to human lungs, it is effectively the smoke and dust particles in the air.  PM10 is the part of suspended particles that are only 10(µM) micrometres in size.
  • Carbon Monoxide – a poisonous gas to human beings, it is highly dangerous because it is colourless and odourless
  • Sulphur oxides – these are given out during the combustion of fossil fuels, they often mix with water in the atmosphere to give Sulphuric acids
  • Carbon dioxide – the most talked about pollutant, this gas can cause human enhanced global warming
  • Ozone – this gas protects in the upper atmosphere, but is dangerous to humans when it occurs in high concentrations at ground level in the Troposphere
  • Nitrogen Dioxide – these cause the brown haze above of cities

These gasses can be found in huge concentrations in city areas compared to countryside areas, the most dramatic being SO2, which can be found in concentrations 200 times greater than rural concentrations. Problems can be particularly pronounced in temperature inversions and during anticyclones, when air is prevented from rising which allows pollutants to build up in the lower atmosphere. There is a clear geographic pattern shown on the map below, the safe level that should not be exceeded is 20 (µg/m3), and it is clear that in LEDCs, TNCs and LDCs there are major problems.  It is estimated that this could kill up to 2 million people every year world wide.

Source

 

As a native of Middlesbrough, I am well aware of the problems caused by the atmospheric pollutants above.  In the North East of England, residents of my hometown are known as smogmonsters (!) because of the atmospheric pollution caused by the chemical and steel industries associated with Middlesbrough and Teesside.  Smog is a mixture of smoke and fog, and can be particularly dangerous.  Smoke and sulphur dioxide from burning are condensation nuclei, and in the past in Britain and currently in Industrialising economies these extra nuclei encourage condensation at ground level which produces dense fogs.  London was badly effected by “pea soups” in the past, huge smogs which covered larges areas and caused large scale disruption to our nations capital.  The worst case was in 1952, when an anticyclone settled over London for over 5 days in December.  This descending air caused a temperature inversion, the air was unable to disperse in the sheltered Thames basin and a fog developed as water vapour condensed on soot and coal dust.  Over 12,000 people died, many from respiratory problems and a small number fell into the Thames, as a result of this thick fog.

 

Reducing pollution

The UK is party to many international agreements concerning air pollution, and has its own internal laws and policies concerning the quality of air. Cars have to have emissions tests on an annual basis as part of the MOT whilst industries are obliged to protect the environment as part of strict laws.

The National Air Quality Strategy for the UK sets out air quality standards and objectives for reducing levels of health threatening pollutants.  All of the standards under this law are subject to regulations under the Environment Act of 1995 and are the result of UK incorporation of European Union laws. This act also requires all local authorities in the UK to review and assess air quality in their area.  If any standards are being exceeded then an area is designated an Air Quality Management Area (AQMA) and the local authority (Newcastle City Council for example) must make and implement an action plan designed to reduce levels of the pollutant.  Domestic or home fires are also strictly controlled as part of the Clean Air Act of 1993, and Local Authorities can declare an area a Smoke Free Zone.  Under this order, homes are banned from using fires that cause smoke unless they use smokeless fuel or the appliance is exempt.  Around 50% of households live in Smoke Free Zones in the UK.

Industries are also controlled.  They are regulated under Integrated Pollution Prevention and Control (IPPC) set up under the Pollution Prevention and Control Act of 1999. It is an offence for factories to emit dark smoke under the Clean Air Act of 1993, except under unavoidable circumstances (e.g. lighting up).  The amount of grit and dust emitted is also strictly controlled, and chimneys must have the most modern filters fitted.